Reflectors & Bowls

• Type: 4-sided barndoors
• Compatibility: Profoto Zoom Reflector / Zoom Reflector 2
• Mounting diameter: 18 cm
• Grate holder and filter holder: built-in (spring-loaded)
• Orientation: rotating assembly
• Profoto Part Number: 100671

• Type: Zoomable hard reflector
• Beam angle: adjustable from 35° to 105° (on ProHead)
• Maximum measured power: f/45.1 at 2 m (2400 Ws, ISO 100, on ProHead)
• Grate holder: built-in, compatible with 180 mm grates
• Optional accessories: grilles, airflow restrictors
• Compatibility: Profoto strobes and monolights (neutral glass dome recommended for flat heads such as the D1/B1)
• Reference: 100785

• Type: Zoomable hard reflector
• Beam angle: adjustable from 25° to 50° (on ProHead)
• Power gain: +1 f-stop compared to the Zoom Reflector
• Maximum measured power: f/128.1 at 2 m (2400 Ws, ISO 100, on ProHead)
• Optional accessories: grilles, baffles, ProTube
• Compatibility: Profoto strobes and monolights (neutral glass dome recommended for flat heads)
• Reference: 100624

• Type: High-intensity reflector
• Power gain: up to +2 f-stops
• Compatibility: Profoto flat-front flashes (B10, B10X, etc.)
• Recommended uses: main light, backlight, simulated sunlight
• Typical uses: portraits, sports, and outdoor action shots
• Profoto Part Number: 100793

• Type: Wide-angle zoom reflector
• Beam angle: 40° to 80°, depending on the zoom setting
• Result: Very even lighting, slightly nuanced shadows
• Interior: Silver
• Mount: Profoto (built-in ring)
• Diameter: 29 cm (11.4")
• Material: Metal
• Grate: Compatible (not included)
• Manufacturer's part number: 100711

• Type: Narrow-beam zoom reflector (long-range)
• Beam angle: 20–30°, depending on the position on the head
• Interior: highly reflective silver
• Material: metal, black exterior
• Mount: Profoto mount, built-in ring
• Accessories: Compatible with grates (not included)

Technical Specifications of the Profoto OCF Zoom Reflector:

Compatibility:

• Compatible with Profoto B10, B10 Plus, B1X, B2, and other OCF models

Design:

• Lightweight and compact design for easy portability
• Sturdy construction for professional use

Feature:

• Allows you to adjust the beam width to control the spread and intensity of the light
• Adjustable beam angle from 55 to 85 degrees

Performance:

• Increases the effective flash power
• Improves light control for creative effects

Accessories:

• Compatible with OCF grids and filters for additional customization

• Type: snoot (beam concentrator)
• Effect: a narrow, well-defined circle of light
• Compatibility: Profoto OCF strobes (B1, B2, B10)
• Installation: directly on the torch
• Stray light: eliminated around the beam
• Manufacturer's part number: 101200

• Type: snoot (light-concentrating cone)
• Profoto Part Number: 100651
• Mounting: on Zoom Reflector, via 180 mm grid/filter holder
• Effect: a narrow, well-defined circle of light
• Material: metal, black finish
• Weight: approx. 0.7 kg

• Type: 4-panel airflow damper with grille holder
• Compatibility: Profoto Zoom Reflector (ProHead and compatible heads)
• Diameter: 18 cm
• Mounting: Spring-loaded mount on the Zoom reflector
• Compatible accessories: honeycomb grids and filters for the Zoom reflector
• Weight (packaged): approx. 0.42 kg
• Manufacturer's part number: 100671

• Type: Fresnel light shaper for Profoto strobes
• Lens: Fresnel, 200 mm diameter
• Beam adjustment: built-in iris (variable diameter)
• Focus: adjustable (sharpness of the beam edge)
• Mount: Profoto (flat and protruding heads)
• Construction: ventilated metal body
• Weight: approx. 3.2 kg

• Type: Diffusing globe (bare bulb/lantern effect)
• Diameter: 30 cm
• Beam angle: very wide, approx. 180° around the sphere
• Mounting: Profoto Speedring included
• Compatibility: Profoto flash heads and all-in-one units
• Pilot lamp: 300 W max
• Weight: 1.1 kg

• Type: Special "hard light" reflector
• Effect: light similar to direct sunlight, deep, sharply defined shadows
• Maximum measured power: f/32 at 2 m (2,400 Ws, ISO 100, on ProHead)
• Compatibility: exposed-tube torches (ProHead, Acute/D4 heads)
• Not compatible: flat-face torches (B1, B1X, B10, D1, D2…)
• Recommended: clear glass dome instead of frosted glass
• Accessories: Compatible with Zoom Reflector accessories
• Reference: 100718

• Type: Rigid softbox with built-in Profoto mount
• Dimensions: approx. 20 × 30 cm
• Dimensions: approx. 30.5 × 20.3 × 10.2 cm
• Maximum power: 1,200 Ws (flash) / 250 W (model light)
• Front panel: fixed diffuser (not removable)
• Special feature: multiple ProBox units can be combined into a single large sound source
• Compatibility: Profoto-mount strobes and monolights (B1X, D1, D2, ProHead Plus, etc.)
• Restriction: Do not use with ProDaylight / ProTungsten continuous lights
• Weight: approx. 2.6 kg

• Type: Fresnel spot for Profoto flashes
• Lens: Fresnel, Ø 300 mm (11")
• Beam angle: 42°
• Focusing: The beam can be focused by sliding the flash head within the accessory (Profoto zoom)
• Compatibility: ProHead, Acute/D4, Twin Head, ComPact, D1, D2, B1, B10, and Profoto tungsten and HMI light sources
• Optional accessory: dedicated light-blocking device (barndoors)
• Reference: 100706

• Type: Optical Reflector (Spot) for Profoto Flashes
• Lens: 115 mm
• Focus: adjustable, from sharp to blurry
• Iris: built-in, 20 blades
• Gobo holder: built-in (gobos and creative projections)
• Magnetic front panel: compatible with Clic accessories
• Maximum power: 2,400 Ws in flash mode (approx. 8 full-power flashes per minute) / 200 W in continuous mode
• Compatibility: Profoto flat and protruding heads
• Cooling: 360° ventilated heat sink
• Dimensions: approx. 58 × 32 × 25 cm
• Weight: approx. 2 kg